Amplifier

An electronic amplifier or amplifier is an electronic device used for increasing the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with larger amplitude. In this sense, an amplifier may be considered as modulating the output of the power supply. There are numerous types of electronic amplifiers specialized to various applications. An amplifier can refer to anything from a electrical circuit using a single active component to a complete system such as a packaged audio hi-fi amplifier.

• Audio Power Amplifier
• Broadband Amplifier
• Dual Band Amplifier
• High Frequency Amplifier
• High Power Amplifier
• Low Frequency Amplifier
• Low Power Amplifier
• Microwave Amplifier
• Mid-Power Amplifier
• Preamplifier
• Pulse Amplifier
• RF Amplifier
• Solid State Amplifier
• Tetrode Tube Amplifier
• TWT Amplifier

Filter: 

[show all brands] Agilent TechnologiesAmplifier ResearchComtechCom-PowerE&IHughesLogiMetricsSolar ElectronicsTESEQAE TechronInstruments For IndustrySpanawave

Solar 2352-1 Audio Power Amplifier 200 Watt For Conducted Audio Frequency Susceptibility Testing. The Solar Model 2352-1 Audio Power Amplifier has a wide band frequency response and is capable of providing up to 200 watts at 1000 Hz into 2.0 ohms. Requires approximately 0.5 volts signal inp... View Details >>

Solar 6552-1A Solid State Audio Amplifier 100 Watt For Conducted Audio Frequency Susceptibility Testing. The Model 6552-1A Audio Amplifier has a wide frequency response and is capable of providing up to 100 watts at 1000 Hz into 2.4 ohms at low distortion levels. Requires approximately 0.6 volt si... View Details >>

Spanawave GT-1000B Microwave Power Amplifier 100 MHz – 20 GHz 10W Spanawave GT-1000B Microwave Power Amplifier 100 MHz – 20 GHz 10W offers linear high-power amplification across multi-octave bands. It is ideal for testing in EMC, wireless communications applications and Defense EW systems. For EMI/EMC and standar... View Details >>

TESEQ CBA 100M-110 Class A Broadband Amplifier 10 kHz – 100 MHz 110 W This low frequency amplifier can be used in conjunction with other Teseq amplifiers to cover the entire frequency range from 10 kHz to 6 GHz with convenient frequency break points allowing you to optimize the power level in each range. The Class ... View Details >>

TESEQ CBA 100M-1100 Class A Broadband Amplifier 10 kHz – 100 MHz 1.1kW This low frequency amplifier can be used in conjunction with other Teseq amplifiers to cover the entire frequency range from 10 kHz to 6 GHz with convenient frequency break points allowing you to optimize the power level in each range. The Class ... View Details >>

TESEQ CBA 100M-400 Class A Broadband Amplifier 10 kHz – 100 MHz 400 W This low frequency amplifier can be used in conjunction with other Teseq amplifiers to cover the entire frequency range from 10 kHz to 6 GHz with convenient frequency break points allowing you to optimize the power level in each range. The Class ... View Details >>

TESEQ CBA 1G-018 Class A Broadband Amplifier 100 kHz - 1 GHz 18W Designed specifically for EMC testing, this mismatch tolerant Class A amplifier is able to produce a test field of 10 V/m in GTEM cells up to 1 m in height and can also produce more than a 10 V test level when used in conjunction with a CDN. This amp... View Details >>

TESEQ CBA 1G-070 Class A Broadband Amplifier 10 MHz – 1 GHz 70 W Designed specifically for radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the very poor match typically associated with broadband EMC antennas when used at low frequency. Since antennas typically exh... View Details >>

TESEQ CBA 1G-1000 Class A Broadband Amplifier 80 MHz – 1 GHz 1 kW Designed specifically for Radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the very poor match typically associated with broadband EMC antennas when used at low frequency. Since antennas typically e... View Details >>

TESEQ CBA 1G-150 Class A Broadband Amplifier 80 MHz – 1 GHz 150 W Designed specifically for radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the very poor match typically associated with broadband EMC antennas when used at low frequency. Since antennas typically ex... View Details >>

TESEQ CBA 1G-250 Class A Broadband Amplifier 80 MHz – 1 GHz 250 W Designed specifically for radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the very poor match typically associated with broadband EMC antennas when used at low frequency. Since antennas typically ex... View Details >>

TESEQ CBA 1G-275 Class A Broadband Amplifier 80 MHz – 1 GHz 275 W Designed specifically for radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the very poor match typically associated with broadband EMC antennas when used at low frequency. Since antennas typically ex... View Details >>

TESEQ CBA 1G-500 Class A Broadband Amplifier 80 MHz – 1 GHz 500 W Designed specifically for radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the very poor match typically associated with broadband EMC antennas when used at low frequency. Since antennas typically ex... View Details >>

TESEQ CBA 230M-022 Class A Broadband Amplifier 150 kHz – 230 MHz 22 W Designed specifically for conducted EMC testing, this mismatch tolerant Class A amplifier is ideally suited to provide power into a CDN for IEC 61000-4-6 conducted susceptibility testing up to and beyond the normal 10 V emf test level. The Class ... View Details >>

TESEQ CBA 230M-035 Class A Broadband Amplifier 150 kHz – 230 MHz 35 W Designed specifically for Conducted EMC testing, this mismatch tolerant Class A amplifier is ideally suited to provide power into injection clamps and CDN for IEC 61000-4-6 conducted susceptibility testing up to and beyond the normal 10 V emf test le... View Details >>

TESEQ CBA 230M-80 Class A Broadband Amplifier 150 kHz – 230 MHz 80 W Designed specifically for Conducted EMC testing, this mismatch tolerant Class A amplifier is ideally suited to provide power into Bulk Current Injection (BCI) Probes, injection clamps and CDN for IEC 61000-4-6 conducted susceptibility testing up to a... View Details >>

TESEQ CBA 3G-012 Class A Broadband Amplifier 800 MHz – 3.1 GHz 12 W Designed specifically for Radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antennas are usually well matched at these h... View Details >>

TESEQ CBA 3G-025 Class A Broadband Amplifier 800 MHz – 3.1 GHz 25 W Designed specifically for Radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antennas are usually well matched at these h... View Details >>

TESEQ CBA 3G-050 Class A Broadband Amplifier 800 MHz – 3.1 GHz 50 W Designed specifically for Radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antennas are usually well matched at these h... View Details >>

TESEQ CBA 3G-100 Class A Broadband Amplifier 800 MHz – 3.1 GHz 100 W Designed specifically for Radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antennas are usually well matched at these h... View Details >>

TESEQ CBA 3G-180 Class A Broadband Amplifier 800 MHz – 3.1 GHz 180 W Designed specifically for Radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antennas are usually well matched at these h... View Details >>

TESEQ CBA 3G-300 Class A Broadband Amplifier 800 MHz – 3.1 GHz 300 W Designed specifically for radiated EMC testing, this mismatch tolerant class A amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antenna are usually well matched at these hi... View Details >>

TESEQ CBA 3G-450 Class A Broadband Amplifier 800 MHz – 3.1 GHz 450 W Designed specifically for Radiated EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antennas are usually well matched at these h... View Details >>

TESEQ CBA 400M-100 Class A Broadband Amplifier 1 MHz – 400 MHz 100 W Designed specifically for automotive, military and aerospace BCI EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the varying match typically associated with this type of testing. The Class A design ensures a... View Details >>

TESEQ CBA 400M-110 Class A Broadband Amplifier 10 kHz – 400 MHz 110 W Designed specifically for automotive, military and aerospace BCI and other susceptibility EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the varying match typically associated with this type of testing. The... View Details >>

TESEQ CBA 400M-260 Class A Broadband Amplifier 10 kHz – 400 MHz 260 W Designed specifically for automotive, military and aerospace BCI and other susceptibility EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the varying match typically associated with this type of testing. The... View Details >>

TESEQ CBA 6G-030 GaN Broadband Amplifier 1.8 GHz – 6 GHz 30 W Designed specifically for Radiated EMC testing, this mismatch tolerant amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antenna are usually well matched at these high frequ... View Details >>

TESEQ CBA 6G-050 GaN Broadband Amplifier 1.8 GHz – 6 GHz 50 W Designed specifically for Radiated EMC testing, this mismatch tolerant amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antenna are usually well matched at these high frequ... View Details >>

TESEQ CBA 6G-100 GaN Broadband Amplifier 1.8 GHz – 6 GHz 100 W Designed specifically for Radiated EMC testing, this mismatch tolerant amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz. Although antenna are usually well matched at these high frequ... View Details >>

TESEQ PA 5740 Power Amplifier/Battery Simulator This battery simulator is designed to replace the vehicle battery in the test environment. These sources must fulfill various criteria concerning power rating, voltage, slew rate, impedance, etc. depending on the particular application. Bipolar curre... View Details >>

CISPR

CISPR 11

CISPR 14 - 1

CISPR 14 - 2

CISPR 14 - 2

CISPR 16 - 1

CISPR 16 - 2

CISPR 16 - 3

CISPR 16 - 4

CISPR 22

CISPR 24

IEC

IEC/TR EN 61000 - 1 - 1

IEC/TR EN 61000 - 2 - 1

IEC/TR EN 61000 - 2 - 3

IEC EN 61000 - 3 - 2

IEC EN 61000 - 3 - 4

IEC/TC EN 61000 - 3 - 5

IEC EN 61000 - 4 - 2

IEC EN 61000 - 4 - 3

IEC EN 61000 - 4 - 4

IEC EN 61000 - 4 - 5

IEC EN 61000 - 4 - 6

IEC EN 61000 - 4 - 7

IEC EN 61000 - 4 - 8

IEC EN 61000 - 4 - 9

IEC EN 61000 - 4 - 11

European

EN 50 081 part 1

EN 50 081 part 2

EN 55 011

EN 55 013

EN 55 014

EN 55 015

EN 55 020

EN 55 022

EN 55 024

EN 50 082 part 1

EN 50 082 part 2

EN 50 093

American

FCC Part 15

MIL-STD - 461E