Products

   »   Categories   »   Voltage Surge Generator

Voltage Surge Generator


Filter: 
EM TEST VSS 500N10 Voltage Surge Generator - 10kV per IEC 60065
EM TEST VSS 500N10 Voltage Surge Generator - 10kV per IEC 60065
The VSS 500N10 is a surge voltage simulator specifically designed to meet the surge test requirements for safety tests on audio, video and similar apparatus. The standards specify the components for the pulse generation. A special switch is used in t... View Details >>
EM TEST VSS 500N10.3 Voltage Surge Generator 1.2/50us per EN/IEC 61730
EM TEST VSS 500N10.3 Voltage Surge Generator 1.2/50us per EN/IEC 61730
The surge generator type VSS 500N10.3 is specifically designed to generate high voltage transients as required by IEC/EN 61730-2 for safety testing of photo voltaic panels. The specified waveshape of 1.2/50us must be generated and maintained as s... View Details >>
EM TEST VSS 500N12 Voltage Surge Generator 1.2/50us – 12kV
EM TEST VSS 500N12 Voltage Surge Generator 1.2/50us – 12kV
The voltage surge simulator VSS 500N12 generates high voltage transients as required by several IEC standards. The voltage surge pulses are used to test the isolation (voltage withstand) capability of components, sockets, connectors, cables and many ... View Details >>
EM TEST VSS 500N15.1 Voltage Surge Generator 1.2/50us – 15kV
EM TEST VSS 500N15.1 Voltage Surge Generator 1.2/50us – 15kV
The surge simulator type VSS 500N15.1 generates high voltage transients as required by IEC 60255-5 with a source impedance of 500ohm for transient overvoltage tests on "Protection Relays". The output voltage ranges up to 15kV, divided into ... View Details >>
EM TEST VSS 500N6 Voltage Surge Generator 1.2/50us – 6kV
EM TEST VSS 500N6 Voltage Surge Generator 1.2/50us – 6kV
The surge simulator type VSS 500N6 generates high voltage transients as required by IEC 60255-5 with a source impedance of 500ohm for transient overvoltage tests on "Protection Relays". The output voltage ranges up to 6.6kV, covering for te... View Details >>
Haefely AXOS 5 Compact Immunity Test System
Haefely AXOS 5 Compact Immunity Test System
The new AXOS5 compact immunity test system integrates all of the best features of our stand alone test systems into one single economic solution. It combines 5 kV Burst/EFT, Surge combination wave, AC/DC Dips & Interrupts, along with an integrate... View Details >>
Haefely ECOMPACT 4 Compact Transient Immunity Test System 4.2kV
Haefely ECOMPACT 4 Compact Transient Immunity Test System 4.2kV
The ECOMPACT 4 is an ultra-compact immunity tester that performs all the most commonly used transient immunity tests, including Surge, EFT, Dips/Interrupts and AC/Surge Magnetic Field. The simplified user interface provides quick selection of tests a... View Details >>
Haefely ECOUPLER 4 Coupling / Decoupling Network for ECOOMPACT 4
Haefely ECOUPLER 4 Coupling / Decoupling Network for ECOOMPACT 4
The ECOUPLER 4 is an ultra-compact coupling and decoupling network for burst and surge coupling onto three-phase power lines. ECOUPLER 4 can be controlled manually from its front panel or automatically from the PC, using the EMV Check software enclos... View Details >>
Haefely PCD 120 & PIM 120 10/700us Test System
Haefely PCD 120 & PIM 120 10/700us Test System
To test telecom systems the 10/700us impulse also called telecom impulse is used. This impulse is characterized by high energy and a relative fast rise time. The 10/700us test system includes with the impulse module PIM 120 and the automatic coupl... View Details >>
Haefely PIM 100 1.2/50us & 8/20us Combination Wave Impulse Module
Haefely PIM 100 1.2/50us & 8/20us Combination Wave Impulse Module
IEC 61000-4-5 and ANSI C62.41 describe a combination Wave or Hybrid generator with defined open AND short circuit waveforms. The Combination Wave is used to test AC and DC power systems. Safety is paramount with surge impulses. The PIM 100 High Vo... View Details >>
Haefely PIM 110 0.5us - 100 kHz Ring Wave Impulse Module
Haefely PIM 110 0.5us - 100 kHz Ring Wave Impulse Module
IEC 61000-4-12 and ANSI C62.41 describe a Ring Wave generator for application on power lines in a protected environment. ANSI C62.41 specifies the ring wave for testing products situated in Location Category A and B. The standard differentiates betwe... View Details >>
Haefely PIM 120 & PCD 120 10/700us Test System
Haefely PIM 120 & PCD 120 10/700us Test System
To test telecom systems the 10/700us impulse also called telecom impulse is used. This impulse is characterized by high energy and a relative fast rise time. The 10/700us test system includes with the impulse module PIM 120 and the automatic coupl... View Details >>
Haefely PIM 130 1.2/50us Voltage Impulse Module
Haefely PIM 130 1.2/50us Voltage Impulse Module
Electric Strength and transient level tests are made to ensure the safety of operating personnel. Such tests can be performed with the PIM 130. Safety of Information Technology Equipment is covered in standards IEC 60950 and UL 1950; both of them ... View Details >>
Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Module
Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Module
IEC 61000-4-12 and ANSI C37.90 describe an oscillating wave generator with defined open circuit waveforms parameters. The oscillating wave, also called a “damped sine” is used to test the immunity of electronic relays and relay systems mounted in... View Details >>
Haefely PIM 155 100 kHz & 1 MHz Oscillating Magnetic Field Module
Haefely PIM 155 100 kHz & 1 MHz Oscillating Magnetic Field Module
IEC 61000-4-10 describe an oscillating magnetic field generator. The oscillating magnetic field is used to test the immunity of electronic equipment to be installed in high voltage sub-stations. Safety is paramount when AC and impulse voltages are... View Details >>
Haefely PIM 200 8/20µs & 10/1000µs Current Module
Haefely PIM 200 8/20µs & 10/1000µs Current Module
The PIM200 is used for component testing with impulse currents. For testing overvoltage protection elements such as varistors, gas arrestors and avalanche breakdown diodes with clamping voltages up to 3kV. Both impulses shapes 8/20µs and 10/... View Details >>
Haefely PIM 210 8/20µs & 10/1000µs Current Module
Haefely PIM 210 8/20µs & 10/1000µs Current Module
The PIM 210 is used for component testing with current impulses. For testing overvoltage protection elements such as varistors and avalanche breakdown diodes with clamping voltages up to 3kV. Both impulse shapes 8/20µs and 10/1000µs a... View Details >>
Haefely PS 1500 15kV Impulse Voltage Generator
Haefely PS 1500 15kV Impulse Voltage Generator
The PS 1500 generator is fully compliant to the IEC, EN and UL requirements for safety testing of ITE, Audio, Video and similar equipment and components used in this kind of equipment. Clause 10 of the IEC/EN 60065 standard specifies tests on equ... View Details >>
Haefely PSURGE 30.2 Modular 30kV / 30kA Surge Test System
Haefely PSURGE 30.2 Modular 30kV / 30kA Surge Test System
This test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge is characterized by high energy and relative fast front times. Pulse durations are widely variable as are the... View Details >>
Haefely PSURGE 8000 Surge Platform Test System
Haefely PSURGE 8000 Surge Platform Test System
This system meets ALL your current and future Surge Testing requirements! A modular expandable system that grows with your application needs. The modular concept is built around a PC based host controller (the PSURGE 8000 Controller) with physica... View Details >>
Haefely VTM 15000 Impulse Transformer for Insulation Testing
Haefely VTM 15000 Impulse Transformer for Insulation Testing
The VTM 15000 is used for insulation testing with 1.2/50us voltage impulses. The VTM 15000 runs together with a combination wave generator such as PIM 100 or PSURGE 4010. The output voltage of the generator is doubled; the voltage wave shape remai... View Details >>
TESEQ NSG 3040 Multi-Function Generator System 4 kV Solution
TESEQ NSG 3040 Multi-Function Generator System 4 kV Solution
Teseq’s new NSG 3040 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.... View Details >>
TESEQ NSG 3060 Multi-Function Generator System 6 kV Solution
TESEQ NSG 3060 Multi-Function Generator System 6 kV Solution
Teseq’s new NSG 3060 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.... View Details >>

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E